Flash install

- unzip downloaded file to your PC

- Copy file from your PC into USB flash memory and rename it into "usb_update.img"

- IMPORTANT: Use "Safety remove USB device" function before disconnecting your USB flash memory from PC !

- Turn off your receiver (Standby+OK on front panel) and connect USB memory to USB (host) connector on your receiver.

- Press and hold Standby on front panel until "BOOTING" message appears on display,
press Up button . "USB UPGRADE" message should appear on display of your receiver - software update performs automatically.

- Wait until DONE message appears and restart your receiver.

shark wrote:

- unzip downloaded file to your PC

- Copy file from your PC into USB flash memory and rename it into "usb_update.img"

- IMPORTANT: Use "Safety remove USB device" function before disconnecting your USB flash memory from PC !

- Turn off your receiver (Standby+OK on front panel) and connect USB memory to USB (host) connector on your receiver.

- Press and hold Standby on front panel until "BOOTING" message appears on display,
press Up button . "USB UPGRADE" message should appear on display of your receiver - software update performs automatically.

- Wait until DONE message appears and restart your receiver.

When using multiboot function, numbers 1 - 4 are reserved for booting Flash images from USB stick.

Now I have my question, is there any method that we can install flash images to these usb partitions. i have tried many times to open flash.img files but failed each time.

Could anyone help me?

Flash images .img are working can be installed only in flash, because of the structure of the image. For usb partitions you need the tar.gz images.