hi
ok, ich glaub ich werd es dann mal testen.
shark wrote: Du kannst Vodka 0.11 image wahlen, weil diese image schon
oscam als emu hat, und Ich setze hier die config files fur die oscam
mit Einstellungen fur die S02 Karte.Du musst nur die personliche daten
in die files schreiben.
schönen dank.
leider habe ich überhaupt keine ahnung.
wie muss ich was wo reinschreiben?
wenn ich das richtig sehe, muss ich unter oscam.user die user eintragen
also in meinem fall zwei
einmal die ipbox
und einmal den opticum
richtig?
wie muss denn eine config genau aussehen?
ipbox ip 192.168.1.4
darf alles sehen
opticum (über dlan) 192.168.1.10
darf auch alles sehen
oder was mir noch lieber wäre.
kennt sich wer mit
newcs und mgcamd aus? denn dieses läuft ja bisher super, außer das alle
paar wochen die s02 karte dunkel ist... wichtig ist erst einmal, dass die s02 im internen reader läuft und "immer" hell bleibt (ohne dass ich die dbox2 immer alle paar wochen rauskramen muss.)
hier meine aktuelle config
newcs.xml
Code:
<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10100</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>11000</port>
<enabled>yes</enabled>
</server>
<user>
<name>root</name>
<password>relook</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>cardserv</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<!-- <userfile>/tmp/users.txt</userfile> -->
<user>
<name>localuser1</name>
<password>localuser1</password>
<au>on</au>
</user>
<user>
<name>opticum</name>
<password>opticum</password>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>
mg_cfg
Code:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 02 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 12 }
# map all 180x nagra caids to 1801
# default is 01
F: { 01 }