(multi)boot on Titan images

Hello,

I use an titan image on Ipbox 910hd (flash). The box have a HDD and a USB stick.

I have few questions:
1. it is possible to boot another image? If Yes, a image on HDD? On USB stick?
2. If possible, how I can use the HDD in order to boot another images?
3. What kind of images (E2, DGS, ...) may I boot on HDD or/and USB?

Regards,
Lee

As far as I know it doesn't work, but I did'nt test this part. Waiting for someone else to write if it's possible.

shark wrote:

As far as I know it doesn't work, but I did'nt test this part. Waiting for someone else to write if it's possible.

I tried with a Titannit and an AAF Reloaded image to (multi)boot an Enigma2 image on HDD (/dev/sda) or USB (/dev/sdb) without succes. When 2 to 9 remote key is pressed, the LCD shows (SDAn - USB or SDBn - USB) but nothing happens.

lee.wang wrote:

Hello,

I use an titan image on Ipbox 910hd (flash). The box have a HDD and a USB stick.

I have few questions:
1. it is possible to boot another image? If Yes, a image on HDD? On USB stick?
2. If possible, how I can use the HDD in order to boot another images?
3. What kind of images (E2, DGS, ...) may I boot on HDD or/and USB?

Regards,
Lee

Multi booting is possible:

Press 1 boot from flash and press 2 boot from USB only one i.e., first partition boots Enigma2 images.

drnaeed wrote:

lee.wang wrote:

Hello,

I use an titan image on Ipbox 910hd (flash). The box have a HDD and a USB stick.

I have few questions:
1. it is possible to boot another image? If Yes, a image on HDD? On USB stick?
2. If possible, how I can use the HDD in order to boot another images?
3. What kind of images (E2, DGS, ...) may I boot on HDD or/and USB?

Regards,
Lee

Multi booting is possible:

Press 1 boot from flash and press 2 boot from USB only one i.e., first partition boots Enigma2 images.

Good day,

I have IPBOX 900HD, and found working all USB bootable E2 images like PKT, HDMU, and BP Panther images but only one at a time. Only PGI usb image does not get installed. I have no HDD installed. But I think it might work with the first partition of HDD.

multibot cum se instaleaza la imaginea titan la fel ca si la pkteam la ipbox910hd

georgel_1969 wrote:

multibot cum se instaleaza la imaginea titan la fel ca si la pkteam la ipbox910hd

good day

Using DCC FTP your PKTeam.tar file to /var/media/autofs/sda1 install it using command

tar -zxvf /var/media/autofs/sda1/name of image in full

when all extracted then type
SYNC
SYNC

After this OFF and ON your receiver and press 2 button and wait

Hi, it works! I saw it myself in my IP910HD + IP9000HD.



regards
hekasat